Descripción
Room-Tools is the leading measuring and analysis software for acoustics, sound reinforcement, permanent installation and studio applications. Room Tools are running on standard notebooks with Windows and are easy to use by its ergonomic user interface and mobility.
Features
Measuring signal
Sweep with constant amplitude, logarithmic growing time increment
Sampling times
740 ms (32k FFT), 1.48 s (64k FFT),2.96 s (128k FFT)
Time domain plots
Impulse response (full range)
Step response
ETC (full range)
Schroeder plot (full range)
Time domain data and settings
Marker position [ms from 0]
Marker delta [ms, FFT resolution, cm]
Cursor position [ms, cm, dB, ms from left marker]
20 Overlays with management
Frequency domain plots
Frequency response [0-20 kHz]
Phase, EQ curves
Frequency domain data and settings
Cursor position [ms, dB]
Smothing [1/12, 1/6, 1/3, 1/1 octave, off]
Normalisation [off, L, L R]
EQ controls [parametric, linear phase FIR]
20 Overlays with management
Waterfall plots
Waterfall [frame or spectral view]
Waterfall settings
3D Rotation [t, f, level]
Frequency resolution [2.7, 21.5, 43 Hz]
Time resolution [0 – 285 ms]
Multi plot view [1, 4, 9]
Acoustics, plots
EDT (0/-10 dB)
RT60 (-5/-20 dB)
RT60 (User)
Schroeder
ETC
Line fit, measuring points
Acoustics data & settings
Resolution: 1/3, 1/1 octave
Detailed curve selection
EDT (0/-10 dB) [ms]
RT60 (-5/-20 dB) [ms]
RT60 (User) [ms]
C50 [dB]
C80 [dB]
D50 [%]
Ts [ms]
Speech intelligibility [STI, CIS, %ALCons, RASTI]
Speech intelligibility rating
MTF
Cursor position Octave/Schroeder [ms, cm, dB]
Cursor position Decay [Hz, ms]
RTA
Resolution: 1/12, 1/6, 1/3, 1/1 octave
Adjustable Decay mode and decay time
Display types: Line, bar, scroll
RTA Calibrated
Guideline ISO/EN conforming RTA
Resolution: 1/3, 1/1 octave
SPL calibration
Average: Mov, 5, 2, 1 min, 30, 20, 10, 5, 1 s, off
A, B, C weighting
Integration time fast / slow
Longtime RTA table, value every 0.2 s
FFT Analyser
Resolution: 0.7, 1.3, 2.7, 5.4 and 10.7 Hz
Longtime spectrogram, different ranges
Generator
Signals: Pink Noise, White Noise, Sine, Wave file
Repeat times 1 – infinite
Import/Export
Time data import: Wave file
Graphics export via Windows clipboard
Export Time, frequency, acoustics, tabular data RTA Frequency as ASCII
Industries
Broadcast & Studio
Periodical quality control of a lot of speaker systems in broadcast and studio environments is a special challenge to ensure perfect operation. Room Tools support this measurements for one of the most critical component in the signal chain on recording, mixing, editing and mastering workspaces made by the service or technical department.
In addition Room Tools can be used for fast electrical masurements and the analysis of acoustic parameters of rooms.
Acoustics
Acousticians use Room Tools as the easy to use measuring system for mobile applications with a high reliability. Be it for decay time measurements in public domain areas or in studios for reflection analysis.
Sound Reinforcement
Live in concert or on other events. Room Tools provide FOH and monitor people fast access to all important parameters of their system. The work with strong time limits and at full stretch so there is an essential demand on a easy to use and reliable system. Room Tools support this people in preparing the show as well as while it runs.
Installation
In permanent installation it is important to verify speech intellegibility for voice alarm systems and public domain buildings. This measurements are made by different types of companies who make an essential contribution for quality assurance with it.
Room Tools take care of the requirements of this users with their mobility and a short setup time.
